Shaped for smaller paddlers who value speed and manoeuvrability but don’t want to compromise on practicalities, the 12’0″ Voyager inflatable paddleboard is a sleek expedition board. A game-changer for shorter, lighter tourers, it’s also an appealing option for advanced mid-to-heavyweights seeking a faster, more responsive, yet comfortable board.
At 12′ long with an ample 285L of volume, this 12’0″ Voyager happily carries plenty of weight with front and rear cargo points, although its reduced dimensions make it easier to handle than its bigger Voyager siblings. Its unique V-Hull and twin-fin setup offer a locked-in ride in all water states as well as superior straight-line tracking. This, combined with a narrower 28″ planshape, means covering longer distances takes less effort.
Built in Red’s exclusive, high-density MSL® material, our patented RSS battens further improve rigidity. An elongated central handle makes portaging easier while our new removable side handles can provide more clear deck space, allowing for a wider stance.
Benefits.
- Sleek: 28″ wide tourer designed for smaller, lighter paddlers – or experienced riders wanting more speed.
- Efficient: narrower planshape and hard-release Speed Tail enhance glide and reduce effort over longer distances.
- Practical: just 120mm deep yet with a generous 285L of volume for load-carrying.
- Performance: V-Hull and twin-fin setup provide a locked-in ride and superior tracking.
- Robust: solidly constructed in Red’s exclusive high-density MSL® material.
- Reinforced: RSS battens add extra rigidity. Ergonomic: complete package, including market-leading fixtures and accessories, packs neatly into our comfortable All-Terrain Backpack.
Specifications.
| Board Length | 12’0″ |
| Board Thickness | 4.7″ / 120mm |
| Board Volume | 285L |
| Board Weight | 12.2kg / 26.9lb |
| Board Width | 28″ / 711mm |
| Bag Size | 980mm (h) x 380mm (w) x 360mm (d) |
| Bag Volume | 134L |
| Fins | 8″ Touring Fin (x2) |
| Paddle Options | Hybrid Tough, Prime |
| Complete Package Weight | 19.85kg / 43.76lb |
Sustainability.
At Red, sustainability isn’t just marketing hype – it’s at the core of what we do. As a certified B Corp (www.bcorporation.net) we champion high standards of social and environmental performance, transparency, and accountability.
Fundamentally, our boards are designed and built to last. Our quality-assured Tec Air process has an extremely low warranty rate below 0.5%. Maximising longevity minimises our impact on the planet.
Yet even durable Red kit will eventually reach end-of-life, hence our ‘design for disassembly’ approach. For example, all Titan pump components are replaceable, while using 100% recoverable virgin plastic in our fins, finboxes and RSS battens ensure they’re fully recyclable.
Our manufacturing processes, like turning the offcuts from our EVA deckpads into keyrings, aim for zero waste too, reflecting our commitment to low-impact resource selection.
Care.
How to store your board
Before storing, rinse all equipment in fresh water and let it dry completely.
To pack away, lay the deflated board deck-up and place the pump across the nose, leaving enough room to wrap the board over. Roll tightly, then secure with the strap. Use the backpack’s internal strap to secure the board inside.
Store your board in a cool, dry place, out of direct sunlight. If keeping it rolled up, avoid excess pressure on the straps. If space allows, it’s best to store the pump separately.
You can also leave your board inflated, ideally kept on a flat surface or upright – but do reduce the board’s pressure to below 15psi if not in use for a while.
Material.
What is MSL®? Safe. Stiff. Durable.
Monocoque Structural Laminate or MSL® is the world’s leading drop-stitch material. Exclusive to Red Paddle Co boards, it’s made to our exact specifications.
Monocoque: meaning the coating is integral to the structure. MSL® drop-stitch technology integrates a highly durable, reinforced coating to the ultra-high-definition weave to form an inseparable base layer.
Structural: the high-tensile drop-stitch fibres are designed to withstand pressures in excess of 22psi, meaning Red boards can be inflated to provide unrivalled stiffness and confidence, no matter the rider weight or prevailing conditions.
Laminate: the reinforced composite coating is bonded to the textile core using machine welding that applies heat and pressure to the inner PVC layer, saving over 2kg of adhesives and reducing cosmetic and safety concerns. Produced under low tension, this process creates a torsional stiffening effect when the boards are inflated, making MSL® stiffer at lower pressures.
Gallery.
Features.
Front Handle
Front handle: Allows you to easily pull the board out the water or surf.
Accessory Mount
Accessory mount: Attach cameras and phones or tow your board securely using the inbuilt D-ring
Cargo System
Cargo system: Six-point bungee system for easy and secure storage.
Smalls Loop
Smalls loop: Ideal for water bottle and flip flop storage
Side Handles
Some riders prefer a clear deck space for wider stance, handles can be removed if required.
Centre Carry Handle
Soft touch, tubular handle with embroidered logo for comfort whilst carrying.
Deckpad
Deckpad: Super grippy ‘Red’ embossed EVA deckpad to stop deck becoming slippy and offer a comfort grip on the main standing area.
RSS
RSS Patented innovation: The Rocker stiffening system (RSS) utilises two external pure plastic battens designed to give specialist boards up 40% more stiffness.
Tail Pad
Tailpad: Deep, chevron square cut provide extreme grip at the tail for step back turns.
Leash Point
Leash point: Secure, inbuilt, marine grade stainless steel D-ring to firmly secure your leash.
Valve
Valve: Makes inflation and deflation quick and easy.
Square Tail
Square Tail for fast responsive paddling.
