fbpx

F-ONE ESCAPE CARBON 530 2020

754$

SKU: 77207-0802 Categories: , ,

F-ONE ESCAPE CARBON 530 2020

KITE

ESCAPE CARBON 530

TOOL TORX T30 + 3x M6-30mm + (1x M6-30mm Spare) tapered head screws (A4 – T30 torx)

The Escape foil is nothing less than a master piece of hydrodynamic refinement and composite craftmanship.

Amazing Glide & Speed

Control at high speed

Monobloc: 1 pc Carbon Construction

Area: 530 cm²

Span: 58 cm

Aspect Ratio: 6.3

Weight: 1,06 kg (wing only)

Designed to foil at high speed with full control whatever the conditions, the Escape 530 offers enough performances to go racing but it’s “raison d’être” is first and foremost to provide the most exilherating ride on the water. Light or strong wind, racing or carving the Escape is a playful, nimble and enjoyable hydrofoil which delivers an amazing glide with a terrific speed potential and upmost control.

Such a level of performance is only possible through the use of a 1-piece monobloc construction where the entire plane (front wing, fuselage, stabilizer) is molded in one-shot out of pre-preg carbon with great craftmanship. The end result is a piece of carbon composite with the best possible strength and stiffness to make sure you are always in control.

PRE-PREG

With Pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer; this guarantees a perfect ratio between epoxy and carbon, and represents the highest quality process.

Quality control is much better and so is the working environment for the people building our foils. Pre-Preg fabrics offer the lightest weight with the best mechanical properties of carbon fiber.

MONOBLOC STRUCTURE

Having a stiff and solid assembly between all the parts of the foil, is key to making it perform at its best as well as easy to handle.

The connection of the front wing with the fuselage is highly stressed and loaded, it is one of the critical area of the assembly in terms of structures.

The MONOBLOC wings are molded together with the fuselage in one shot, thereby removing the connection and the chances for unwanted and parasitic movements.

The structural fibers of the fuselage are spread into the wing to achieve the most natural, sound and light connection.

It is also incredibly stiff and provide absolute control at all times, with the foil responding perfectly to all of the riders input.

When the overall dimensions are too large for convenient transportation, a connection is set into the fuselage, behind the mast where the loads are smaller.

TITAN CONNECTION

The TITAN connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions.

Its format is compact which is hydrodynamically friendly and very easy to use, assemble and disassemble.

ALU MAST 45 > 95 cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.

The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down.

It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.

The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).

A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).

Sizes recommended:

45 > 95 KITEFOIL

55 > 75 SURF / SUP FOIL

65 > 75 WING FOIL

75 > 85 WIND FOIL

CARBON MAST 75 > 105 cm

A true masterpiece of composite craftmanship and design, the F-ONE Carbon Mast was designed to transform your foiling experience by a significant improvement of the glide and a dramatic weight reduction matched with impressive rigidity.

Available in 75 cm, 85 cm and 105 cm, the F-ONE Carbon Mast is ready for all disciplines: surf, wing, kite, SUP. It features a 4-bolt plate at the top (hole spacing: 160×90mm) and an integrated Titan mast foot at the bottom. It can be connected to virtually all boards on the market featuring the twin track system and can receive all the wings and fuselage that feature the TITAN connection slot.

 

KitesurfDubai.ae is the leading F-one dealer based in Dubai and shipping worldwide.

Shop online for 2020 F-One Inflatable and Foil Kites, Boards, Hydrofoils and accessories. The FOne kite range includes the Bandit and Diablo Kites, as well as the Trax, Acid, Spicy, Unik and Next Kiteboards. 2019 Breeze and FOne Bandit are also available for worldwide deliveries. Free shipping on all F-One Kites, Boards and Bars in the UAE. Free worldwide shipping on F-One Kites and Bars. Reduced shipping rates for F-One Kiteboards to Qatar, Bahrain, Oman, Saudi Arabia, Kuwait, Lebanon, Egypt.

WhatsApp chat