OZONE CONNECT WATER HARNESS
The Connect Water Harness is a new take on Kiteboarding harness design – it is clean, simple, lightweight, and offers freedom of movement that surpasses anything currently on the market.
Ozone have maintained a clean and functional design, no unnecessary cosmetic items will be found on this harness. It is a very comfortable fitting shape with extra soft foam padding, designed to be worn tight for ideal load transfer to the body. Its sleek lines and carefully sculpted shape mean that riding in board shorts is a rash/rub free experience.
The Connect Water harness is perfect for day-to-day freeride sessions on any board – twin tip, surfboard or foil board. The uniquely designed low profile fit increases body movement range in all directions. In the waves this allows a huge amount of extra freedom during turns, where a normal harness can often get in your way resulting in unwanted body positioning.
Its lightweight construction and the possibility to lay it flat without distorting a pre-determined or fixed shape make it the perfect travel harness. When we say lightweight we mean it – the Medium size weighs only 990grams including the spreader bar!
Many harness designs are only available in 3 to 4 sizes, this means those sizes are compromised rather than being refined for your body shape. For this reason we have created a range of eight sizes to offer the perfect fit for everyone. The Connect-Water harness is designed to be worn as tight as possible for a snug fit that will not slide around
|SIZE||Centimetres (waist)||Inches (waist)|
|XXS||68 – 73cm||26.7 – 28.7in|
|XS||72 – 77cm||28.3 – 30.3in|
|S||75 – 80cm||29.5 – 31.5in|
|M||79 – 85cm||31.1 – 33.5in|
|L||84 – 90cm||33.1 – 35.4in|
|XL||89 – 96cm||35.0 – 37.8in|
|XXL||95 – 102cm||37.4 – 40.1in|
|XXXL||100 – 107cm||39.4 – 42.1in|
Low profile fit
The low profile fit increases movement range in all directions – with this harness you will feel free and flexible in your body movements. It is designed for a tight and close fit – the tighter you wear the harness the fewer tendencies it has to ride up or to shift from side to side.
Quick Release Stainless Steel spreader bar
The custom Stainless Steel spreader bar includes an easy push open release, leash attachment ring, and emergency hook knife.
Simple functional design
No unnecessary cosmetic items maintain a clean, lightweight and functional design.
Super lightweight construction
The Medium size Connect-Water harness weighs only 990grams! Attention to design, material selection and no unnecessary cosmetic items have allowed us to build this harness super lightweight.
Ergonomic shaped paneling – load is distributed evenly over a larger area.
Reinforced spreader bar pad
The spreader bar is bolted onto the spreader pad with internal plastic reinforcement to avoid upward twisting of the spreader bar.
Strong internal structure
Plastic layers along the back section with full length webbing support for optimum load distribution and extra strength.
Internal foam padding with soft Neoprene outside layer
Super comfortable to wear on bare skin with no rubbing spots/points. The thick internal foam offers a comfortable fit even when the harness is done up tight.
Extra strong webbing
Heavy duty webbing straps for a long lifespan. Webbing savers reduce wear on the main straps at the spreader bar connection.
Strong, lightweight grab handle on the back of the harness.
Bungee retainers on buckles
Bungee retainers on the buckles store the webbing straps out of the way.
Many harness designs are only available in 3-4 sizes, this means those sizes are compromised rather than being refined for your body shape. For this reason we have created a range of eight sizes to offer the perfect fit for everyone. The Connect-Water harness is designed to be worn as tight as possible for a snug fit that will not slide around.