Shared adventures await with the 15’0″ Voyager Tandem inflatable paddleboard. Whether you’re a couple, just good friends, or a small family looking to make memories on the water, this board was designed for you. The 15′ x 34″ shape easily accommodates two paddlers – plus luggage, and potentially a smaller passenger or two as well.
Packing a huge 723L of volume and 8″ thick, the Tandem stays stable and floaty even when fully loaded. Seven ergonomic tubular handles provide carrying comfort, while parallel rails optimise direction and control while paddling. The six-point cargo system efficiently secures your gear up front, with room for more in the middle with half a dozen extra anchor points.
To wrap it up, the board comes with a 160L All-Terrain Backpack, making transportation and storage simple. This bag provides plenty of room for all your gear – including paddles – for easy portability.
Benefits.
- Unforgettable experiences: for couples, friends, or small families…
- Made to share: designed for a full-sized pair of paddlers, plus extra kit and even a little passenger or two, so no-one’s left behind.
- Stable: incredibly high-volume, 34″ wide design stays comfortable even at full capacity for a relaxing ride.
- User-friendly: seven ergonomic handles for easy carrying.
- Secure storage: equipped with cargo system and extra anchor points.
- Travel-ready: packs down, including paddles and all your essentials, into our 160L All-Terrain Backpack that easily fits in a car boot.
Specifications.
| Board Length | 15’0″ |
| Board Thickness | 8″ / 200mm |
| Board Volume | 723L |
| Board Weight | 18.85kg / 41.56lb |
| Board Width | 34″ / 864mm |
| Bag Size | 1020mm (h) x 380mm (w) x 410mm (d) |
| Bag Volume | 160L |
| Fins | 8″ Touring Fin (x2) |
| Paddle Options | Hybrid Tough, Prime |
| Complete Package Weight | 29.1kg / 64.15lb |
Sustainability.
At Red, sustainability isn’t just marketing hype – it’s at the core of what we do. As a certified B Corp (www.bcorporation.net) we champion high standards of social and environmental performance, transparency, and accountability.
Fundamentally, our boards are designed and built to last. Our quality-assured Tec Air process has an extremely low warranty rate below 0.5%. Maximising longevity minimises our impact on the planet.
Yet even durable Red kit will eventually reach end-of-life, hence our ‘design for disassembly’ approach. For example, all Titan pump components are replaceable, while using 100% recoverable virgin plastic in our fins, finboxes and RSS battens ensure they’re fully recyclable.
Our manufacturing processes, like turning the offcuts from our EVA deckpads into keyrings, aim for zero waste too, reflecting our commitment to low-impact resource selection.
Care.
How to store your board
Before storing, rinse all equipment in fresh water and let it dry completely.
To pack away, lay the deflated board deck-up and place the pump across the nose, leaving enough room to wrap the board over. Roll tightly, then secure with the strap. Use the backpack’s internal strap to secure the board inside.
Store your board in a cool, dry place, out of direct sunlight. If keeping it rolled up, avoid excess pressure on the straps. If space allows, it’s best to store the pump separately.
You can also leave your board inflated, ideally kept on a flat surface or upright – but do reduce the board’s pressure to below 15psi if not in use for a while.
Material.
What is MSL®? Safe. Stiff. Durable.
Monocoque Structural Laminate or MSL® is the world’s leading drop-stitch material. Exclusive to Red Paddle Co boards, it’s made to our exact specifications.
Monocoque: meaning the coating is integral to the structure. MSL® drop-stitch technology integrates a highly durable, reinforced coating to the ultra-high-definition weave to form an inseparable base layer.
Structural: the high-tensile drop-stitch fibres are designed to withstand pressures in excess of 22psi, meaning Red boards can be inflated to provide unrivalled stiffness and confidence, no matter the rider weight or prevailing conditions.
Laminate: the reinforced composite coating is bonded to the textile core using machine welding that applies heat and pressure to the inner PVC layer, saving over 2kg of adhesives and reducing cosmetic and safety concerns. Produced under low tension, this process creates a torsional stiffening effect when the boards are inflated, making MSL® stiffer at lower pressures.
Gallery.
Features.
